The application method of electric eraser suguang 1300

Everybody possibly has a little understanding of the electric eraser, someone have bought, and someone have used it for several years.

But some people possibly don’t know the correct application method of electric eraser, now we make the demonstration by taking Suguang’s four models of electric erasers as the example. Because these four models are the general models at present, some brands’ outward appearances are possibly different, but the application method is closely same, and can be used for reference.

Let’s see the application method of electric eraser Suguang1300:

The steps of preparation before the use

DSC_0016

  1. Install the rubber core in the rubber fixed clip, but this rubber core is shorter. If we couldn’t pick it out after it is used up in the case that we forcibly install it, how should we do next? Please use the clip or stitching clip to pick it from the position of U-lag in the side.

DSC_0044

  1. Open the battery cover after unscrewing the knob, note that you can see the motor after open it, please do not touch it, otherwise you will make a fault.

DSC_0031

  1. Install two AAA batteries into the battery slot

DSC_0047

  1. As the chart, rotate on the right after installing the knob with alignment

Methods of use

DSC_0001

5.Please incline the eraser’s body into 80o along the paper surface while erasing. Please use the moderate erasing force, otherwise it will block up if use too much force.

DSC_0008

6.Erase along the paper surface with 90o by slipping the rubber core after milling the rubber core in the circle shape.

Author: Suguang Electric Eraser
Republishing is allowed, but the sources must be given

[]
1 Step 1
Order Product
Order Quantity
Your Name
Your Email
Your Phoneyour phone number
Leave Message
0 /
Previous
Next